Specification: 30kg/can
Origin: NBT Chemical
Solvent degreasing chemical CS-201: Is a degreasing preparation produced from many different solvents. Suitable for non-ferrous metals such as aluminum, copper, zinc, tin, iron, steel. Works at room temperature without heating.

Advantage:
– Fast oil removal, low consumption.
– Environmentally friendly.
– Does not cause metal surface deformation.

Physical and chemical properties:
State of existence: Solution
Color: Colorless
Solubility in water: Slightly soluble
Properties: Solvent

Bartending:
Method: Soak
Content (%) : 100
Temperature: normal
Time (minutes): 1 ÷ 3

Working standards Appearance Color:
Clear solution No sludge at the bottom, no grease on the surface of the solution Inspection, analysis and supplementation methods. Depending on the actual situation, an appropriate inspection time should be given, as follows:
Check, (times/day): 1 ÷ 3, skim oil regularly.
Clean the tank (monthly): 1. Replace the tank (monthly): 3 ÷ 6
Visual inspection:
Color: colorless, no oil film on the surface of the solution. Periodically dredge the mud, clean the tank, or mix a new tank.

How to check after degreasing:
After the degreasing process, we can check the cleanliness of the surface of the part by spraying distilled water on the surface of the part. If the surface is 100% wet, that is, the entire surface of the part is wet evenly, forming a thin, even film, then the degreasing quality is satisfactory. If there are gaps on the surface of the part that are not wet or liquid droplets condense in some places, it is necessary to degreasing again.

Notes when using CS-201 degreasing chemical:
When using CS-201 degreasing chemical, it is necessary to strictly comply with labor safety and environmental sanitation such as rubber gloves, glasses, masks, boots, and ventilation fans.
– Handling accidents:
Contact with skin, hands, clothing: change clothes immediately, rinse under running water for 15 minutes.
Eye contact: remove contact lenses, rinse gently with clean water for 15 minutes, rest, seek medical advice.
Inhalation: move to fresh air, if difficulty breathing, give oxygen and see a doctor.
Oral contact: drink plenty of water, do not put anything in the throat when the patient faints, see a doctor.
– Storage and inventory: Store in a cool warehouse, clearly label the packaging, according to TCVN. Always keep the can tightly closed.